Deviant Login Shop  Join deviantART for FREE Take the Tour
×



Details

Submitted on
July 25, 2011
Image Size
189 KB
Resolution
844×842
Link
Thumb
Embed

Stats

Views
32,186 (4 today)
Favourites
100 (who?)
Comments
39
Downloads
1,341
×
PM NSP by Hoborginc PM NSP by Hoborginc
This is a Non-Specific Pistol with some moving parts (slide, safety, mag). Assemble it like an ordinary papercraft.

I made it for /po/ as an experiment in designing an intermediate-detail pistol model.

Dimensions:
Length: 6.75" or 17.5 cm
Height: 5" or 12.75 cm
Width: 1.25" or 3.25 cm
Barrel Length: 4.25" or 10.9 cm

Download Link (Mediafire)

As of 2013, the V2 iteration of this model is available, replacing the handmade patterns with digital ones and moving the breech component from the frame to the slide. It's available in black and stainless colors.
Add a Comment:
 
:iconassholecc2112:
assholecc2112 Featured By Owner Aug 19, 2013
hey nice pistol but i need help building it i kept on studying the pics but it's no use


Reply
:iconhoborginc:
Hoborginc Featured By Owner Aug 20, 2013
What parts are giving you trouble?

Also, it might help to see the more detailed instructions that come with the V2, Some parts are changed, but most of it is identical.
Reply
:iconassholecc2112:
assholecc2112 Featured By Owner Aug 20, 2013
the slide is mostly giving me trouble

Reply
:iconhoborginc:
Hoborginc Featured By Owner Aug 20, 2013
It's probably the "Slide Interior", isn't it?

Someone else had a similar question, so here's the explanation:

Take the outermost panels (the ones with the lower corners sticking out), fold and glue them back onto the panels closest to them. The result should be that your new outermost panels are 2x thick, gray on both sides, and the corners are lined up (i.e. the back edge is a smooth curve, and those corners are no longer sticking out).

This should leave you with 5 panels in the center. Fold all the remaining lines so they form about 140 degree angles (gray to gray), so it approximates the slide's shape, just with the white on the outside and the gray on the inside. Take the outermost panels (the double ones), and bring them in a bit tighter, to about 45 degree angle gray to gray. At this point it should resemble the shape visible on the first page of the instructions.

Turn this shape so that the ejection port is at the rear and facing right, just like in the instructions. Take the white panels and glue them to the inside of the slide. The outermost panels should not be glued to anything: they should be free to move around a little bit, but should preferably be turned at about a 45 degree angle from the inner wall. The idea is that they will interface with the triangular grooves on the sides of the Top Box on pg.5. Because they are flat, they have a bit of freedom to adjust themselves, and this flexibility also makes it easier to attach the slide.

It's a bit difficult to explain, but I hope that helps. Let me know if you have more specific questions.
Reply
:iconlithionn:
Lithionn Featured By Owner Jul 26, 2013
try walking in an airport with that :)
Reply
:iconmakahin:
Makahin Featured By Owner Jul 8, 2013
is pretty awesome, but the bullet... can you "fix" it??
Reply
:iconhoborginc:
Hoborginc Featured By Owner Jul 8, 2013
The bullet in the V2 is better.
Reply
:iconmakahin:
Makahin Featured By Owner Jul 8, 2013
okay :3 i'll download it... thkx
Reply
:iconalex10995:
alex10995 Featured By Owner Dec 26, 2012
reply soon please!.
Reply
:iconalex10995:
alex10995 Featured By Owner Dec 26, 2012
where is tan 1?
Reply
Add a Comment: